Product center Products
Product Center / Products
  • Release time: 2018 - 04 - 02
    Spray Drying Plant | Spray Dryer for Detergent PowderAdopt spray tower process. Product specific gravity: 0.25 ~ 0.50g/cm³. The product has good particle and component uniformity, good solubility and stable quality. The tail gas of the whole production system reaches the standard and no sewage discharge. Dry tail gas adopts dry and wet combined dust removal system, environmental protection standard, energy saving and consumption reduction. The design of technology is advanced and the plan is reasonable.According to customers' requirement, we provide the plan, design, equipment su...
  • Release time: 2018 - 04 - 02
    Liquid Detergent Plant | Liquid Detergent Production LineProvide complete set of dishwashing liquid, laundry detergent, toilet liquid, hand sanitizer and other liquid detergent production line. Process and equipment design for different liquid detergent production characteristics. It has characteristics of simple process, low investment and cost. It can realize manual operation, semi-automatic control or automatic control of production.
  • Release time: 2018 - 04 - 12
    Liquid Sodium Silicate Plant | Liquid Sodium Silicate Production LineThe wet process of sodium silicate is a production method in which liquid caustic soda and quartz sand are reacted at high temperature and high pressure to obtain sodium silicate. This production method has significant advantages such as low investment, simple process, easy operation, environmental protectionand no waste generation. lt can produce sodium silicate with molar ratio below 2.5.According to customer needs, we can provide consulting, design, supply, installation, debugging and training services for a complete set o...
  • Release time: 2018 - 11 - 19
    Sodium Silicate Plant | Sodium Silicate FurnaceThe main raw materials of dry process sodium silicate production are soda ash and quartz sand. The process is batching, firing and melting.Process description1. Batching: batching can be divided into manual batching and automatic batching. Manual batching is manually weighing the quartz sand and soda ash according to the proportion of the formula, then put into the furnace to react through lifter. Automatic batching is automatically weighing the quartz sand and soda ash, then automatically put into the furnace to react through loader.2. Firing: af...
  • Release time: 2018 - 04 - 16
    Hot Air Generator | Hot Air FurnaceWe mainly design and manufacture a variety of special industrial firnaces, including direct hot air furnace, indirect hot air furnace, biomass fired hot air furnace, oil/gas fired hot air furnace, regenerative exhaust gas furnace and so on. Our hot air furnace has been widely used in chemical, fertilizer, feedstuff, building materials, medicine, food, metallurgy and other industries's product lines.
Contact information

Tel:0571-85185926  86036218

After-sales:0571-86036279

Fax:0571-85184885

China · Hangzhou

Address:Floor 14th, ZMI Plaza, No.445, Kaixuan Road, Hangzhou, China

Product name: Liquid Sodium Silicate Production Line
Date of listing:2018-04-12

Liquid Sodium Silicate Production Line

Product description: Liquid Sodium Silicate Plant | Liquid Sodium Silicate Production LineThe wet process of sodium silicate is a production method in which liquid caustic soda and quartz sand are reacted at high temperature and high pressure to obtain sodium silicate. This production method has significant advantages such as low investment, simple process, easy operation, environmental protectionand no waste generation. lt can produce sodium silicate with molar ratio below 2.5.According to customer needs, we can provide consulting, design, supply, installation, debugging and training services for a complete set of wet process sodium silicate production lines with an output of more than 5000 tons/year. Process descriptionQuartz sand and liquid caustic soda are mixed evenly in the batching tank, and then put the materials into the reaction kettle and filled with steam. The sodium silicate solution is obtainedafter the reaction of the materials under high temperature and pressure. The solution is pumped to the filter press for filtering to get the clarified liquid product. Then the finished product can be pumped to the finished product tank and sent to the warehouse.
Fabric:
category:
 
 
Model:
  • Product description
  • product details
  •  

Liquid Sodium Silicate Plant | Liquid Sodium Silicate Production Line

The wet process of sodium silicate is a production method in which liquid caustic soda and quartz sand are reacted at high temperature and high pressure to obtain sodium silicate. This production method has significant advantages such as low investment, simple process, easy operation, environmental protectionand no waste generation. lt can produce sodium silicate with molar ratio below 2.5.

According to customer needs, we can provide consulting, design, supply, installation, debugging and training services for a complete set of wet process sodium silicate production lines with an output of more than 5000 tons/year. 


Process description

Quartz sand and liquid caustic soda are mixed evenly in the batching tank, and then put the materials into the reaction kettle and filled with steam. The sodium silicate solution is obtainedafter the reaction of the materials under high temperature and pressure. The solution is pumped to the filter press for filtering to get the clarified liquid product. Then the finished product can be pumped to the finished product tank and sent to the warehouse.


Liquid Sodium Silicate Production Line

Liquid Sodium Silicate Production Line   Liquid Sodium Silicate Production Line


Liquid Sodium Silicate Production Line   Liquid Sodium Silicate Production Line


Liquid Sodium Silicate Production Line   Liquid Sodium Silicate Production Line


Liquid Sodium Silicate Production Line   Liquid Sodium Silicate Production Line




The last one: noNext: no
Relevant recommendations / Products more
  • Spray Drying Plant | Spray Dryer for Detergent PowderAdopt spray tower process. Product specific gravity: 0.25 ~ 0.50g/cm³. The product has good particle and component uniformity, good solubility and stable quality. The tail gas of the whole production system reaches the standard and no sewage discharge. Dry tail gas adopts dry and wet combined dust removal system, environmental protection standard, energy saving and consumption reduction. The design of technology is advanced and the plan is reasonable.According to customers' requirement, we provide the plan, design, equipment supply, installation and debugging of a complete production line for detergent base powder production of 5000 ~ 25000 tons/year.Process configuration from simple manual operation to central computer centralized automatic control.We provide design,manufacture, installation and commissioning of a complete set of detergent powder equipment.We undertake detergent powder production technical consultation and old line transformation technical services.Our company has successfully provided more than 160 chemical enterprises with technical services and equipment around the world, including Unilever, P&G, Indonesia PT Wings, Guangzhou Liby Group, Nice Group, Nafine Group, Guangzhou Lonkey, Topseller Chemical CO., Ltd., Lipton Washing Products Industrial Co. Ltd. ,Nanjing Jiahe Chemical Co., Ltd.
    Membership price: 0 RMB
    Market value: 0 RMB
    Release time: 2018 - 04 - 02
  • Liquid Detergent Plant | Liquid Detergent Production LineProvide complete set of dishwashing liquid, laundry detergent, toilet liquid, hand sanitizer and other liquid detergent production line. Process and equipment design for different liquid detergent production characteristics. It has characteristics of simple process, low investment and cost. It can realize manual operation, semi-automatic control or automatic control of production.
    Membership price: 0 RMB
    Market value: 0 RMB
    Release time: 2018 - 04 - 02
  • Sodium Silicate Plant | Sodium Silicate FurnaceThe main raw materials of dry process sodium silicate production are soda ash and quartz sand. The process is batching, firing and melting.Process description1. Batching: batching can be divided into manual batching and automatic batching. Manual batching is manually weighing the quartz sand and soda ash according to the proportion of the formula, then put into the furnace to react through lifter. Automatic batching is automatically weighing the quartz sand and soda ash, then automatically put into the furnace to react through loader.2. Firing: after the materials are fed into the furnace, the chemical reaction is occurred at the high temperature of 1350-1450℃. The molten sodium silicate form glassy solid lumps by air cooling or water cooling. Finished products are sent to warehouses or stacked or cooled to normal temperature. The regenerative preheater is used in the design of the reflector. The air and coal gas can be separately preheated to 1100℃ and 900℃ by 1200℃ of flue gas from furnace, temperature of exhaust gas is reduced to below 180℃, so as to save energy and reduce consumption.3. Melting: if liquid sodium silicate is needed, the solid sodium silicate can be melted into liquid. There are two ways to melt, the water-cooled solid is melted by the rotary melting tank, and the air-cooled solid is melted by static melting tank.
    Membership price: 0 RMB
    Market value: 0 RMB
    Release time: 2018 - 11 - 19

Tell me your needs and submit your contents. We will contact you for the first time.!

address:Floor 14th, ZMI Plaza, No.445, Kaixuan Road, Hangzhou, Zhejiang, China      Telephone:0571-85185926









' _src='https://www.googletagmanager.com/gtag/js?id=G-P5QPZHRQ6R'>'>https://www.googletagmanager.com/gtag/js?id=G-P5QPZHRQ6R'>








Copyright ©2016- 2018 Zhejiang MEBO industrial Polytron Technologies Inc
ICP preparation in Zhejiang Province17046615-1   Zhejiang public network preparation 33052102000289
Rhinoceros cloud services