Product center Products
Product Center / Products
  • Release time: 2018 - 04 - 02
    Spray Drying Plant | Spray Dryer for Detergent PowderAdopt spray tower process. Product specific gravity: 0.25 ~ 0.50g/cm³. The product has good particle and component uniformity, good solubility and stable quality. The tail gas of the whole production system reaches the standard and no sewage discharge. Dry tail gas adopts dry and wet combined dust removal system, environmental protection standard, energy saving and consumption reduction. The design of technology is advanced and the plan is reasonable.According to customers' requirement, we provide the plan, design, equipment su...
  • Release time: 2018 - 04 - 02
    Liquid Detergent Plant | Liquid Detergent Production LineProvide complete set of dishwashing liquid, laundry detergent, toilet liquid, hand sanitizer and other liquid detergent production line. Process and equipment design for different liquid detergent production characteristics. It has characteristics of simple process, low investment and cost. It can realize manual operation, semi-automatic control or automatic control of production.
  • Release time: 2018 - 04 - 12
    Liquid Sodium Silicate Plant | Liquid Sodium Silicate Production LineThe wet process of sodium silicate is a production method in which liquid caustic soda and quartz sand are reacted at high temperature and high pressure to obtain sodium silicate. This production method has significant advantages such as low investment, simple process, easy operation, environmental protectionand no waste generation. lt can produce sodium silicate with molar ratio below 2.5.According to customer needs, we can provide consulting, design, supply, installation, debugging and training services for a complete set o...
  • Release time: 2018 - 11 - 19
    Sodium Silicate Plant | Sodium Silicate FurnaceThe main raw materials of dry process sodium silicate production are soda ash and quartz sand. The process is batching, firing and melting.Process description1. Batching: batching can be divided into manual batching and automatic batching. Manual batching is manually weighing the quartz sand and soda ash according to the proportion of the formula, then put into the furnace to react through lifter. Automatic batching is automatically weighing the quartz sand and soda ash, then automatically put into the furnace to react through loader.2. Firing: af...
  • Release time: 2018 - 04 - 16
    Hot Air Generator | Hot Air FurnaceWe mainly design and manufacture a variety of special industrial firnaces, including direct hot air furnace, indirect hot air furnace, biomass fired hot air furnace, oil/gas fired hot air furnace, regenerative exhaust gas furnace and so on. Our hot air furnace has been widely used in chemical, fertilizer, feedstuff, building materials, medicine, food, metallurgy and other industries's product lines.
Contact information

Tel:0571-85185926  86036218

After-sales:0571-86036279

Fax:0571-85184885

China · Hangzhou

Address:Floor 14th, ZMI Plaza, No.445, Kaixuan Road, Hangzhou, China

Product name: Air Flow Drying Line
Date of listing:2022-07-05

Air Flow Drying Line

Product description: Drying System | Air Flow DryerThe drying line is composed of wet material feeding system,  hot air generating system,  drying system,  gas separation system,  screening cooling system and so on. After the wet material is dispersed, it merges with the clean hot air generated by the hot air furnace, and a strong mass and heat transfer process takes place in the pulsed air dryer, and the material is quickly dried. After the dry materials are sieved, airlifted and rapidly cooled, they are stored in the finished product bin for storage and packaging. The exhaust gas is dedusted through the dust collector and the discharge is up to standard. Technical characteristics:(1) The pulse airflow dryer has the characteristics of large drying strength, high thermal efficiency, large processing capacity and low energy consumption;(2) The system is operated under micro-negative pressure, the airtightness is very good and the work environment is smoke-free dust leakage;(3) Mature and reliable control system to ensure the uniformity and stability of product quality;(4) The system has strong operability, small footprint and low investment.
Fabric:
category:
 
 
Model:
  • Product description
  • product details
  •  

Drying System | Air Flow Dryer

The drying line is composed of wet material feeding system,  hot air generating system,  drying system,  gas separation system,  screening cooling system and so on. After the wet material is dispersed, it merges with the clean hot air generated by the hot air furnace, and a strong mass and heat transfer process takes place in the pulsed air dryer, and the material is quickly dried. After the dry materials are sieved, airlifted and rapidly cooled, they are stored in the finished product bin for storage and packaging. The exhaust gas is dedusted through the dust collector and the discharge is up to standard.

 Air Flow Drying Line

Technical characteristics:

(1) The pulse airflow dryer has the characteristics of large drying strength, high thermal efficiency, large processing capacity and low energy consumption;

(2) The system is operated under micro-negative pressure, the airtightness is very good and the work environment is smoke-free dust leakage;

(3) Mature and reliable control system to ensure the uniformity and stability of product quality;

(4) The system has strong operability, small footprint and low investment.


Air Flow Drying Line   Air Flow Drying Line


Air Flow Drying Line   Air Flow Drying Line


The last one: noNext: no
Relevant recommendations / Products more
  • Spray Drying Plant | Spray Dryer for Detergent PowderAdopt spray tower process. Product specific gravity: 0.25 ~ 0.50g/cm³. The product has good particle and component uniformity, good solubility and stable quality. The tail gas of the whole production system reaches the standard and no sewage discharge. Dry tail gas adopts dry and wet combined dust removal system, environmental protection standard, energy saving and consumption reduction. The design of technology is advanced and the plan is reasonable.According to customers' requirement, we provide the plan, design, equipment supply, installation and debugging of a complete production line for detergent base powder production of 5000 ~ 25000 tons/year.Process configuration from simple manual operation to central computer centralized automatic control.We provide design,manufacture, installation and commissioning of a complete set of detergent powder equipment.We undertake detergent powder production technical consultation and old line transformation technical services.Our company has successfully provided more than 160 chemical enterprises with technical services and equipment around the world, including Unilever, P&G, Indonesia PT Wings, Guangzhou Liby Group, Nice Group, Nafine Group, Guangzhou Lonkey, Topseller Chemical CO., Ltd., Lipton Washing Products Industrial Co. Ltd. ,Nanjing Jiahe Chemical Co., Ltd.
    Membership price: 0 RMB
    Market value: 0 RMB
    Release time: 2018 - 04 - 02
  • Liquid Detergent Plant | Liquid Detergent Production LineProvide complete set of dishwashing liquid, laundry detergent, toilet liquid, hand sanitizer and other liquid detergent production line. Process and equipment design for different liquid detergent production characteristics. It has characteristics of simple process, low investment and cost. It can realize manual operation, semi-automatic control or automatic control of production.
    Membership price: 0 RMB
    Market value: 0 RMB
    Release time: 2018 - 04 - 02
  • Sodium Silicate Plant | Sodium Silicate FurnaceThe main raw materials of dry process sodium silicate production are soda ash and quartz sand. The process is batching, firing and melting.Process description1. Batching: batching can be divided into manual batching and automatic batching. Manual batching is manually weighing the quartz sand and soda ash according to the proportion of the formula, then put into the furnace to react through lifter. Automatic batching is automatically weighing the quartz sand and soda ash, then automatically put into the furnace to react through loader.2. Firing: after the materials are fed into the furnace, the chemical reaction is occurred at the high temperature of 1350-1450℃. The molten sodium silicate form glassy solid lumps by air cooling or water cooling. Finished products are sent to warehouses or stacked or cooled to normal temperature. The regenerative preheater is used in the design of the reflector. The air and coal gas can be separately preheated to 1100℃ and 900℃ by 1200℃ of flue gas from furnace, temperature of exhaust gas is reduced to below 180℃, so as to save energy and reduce consumption.3. Melting: if liquid sodium silicate is needed, the solid sodium silicate can be melted into liquid. There are two ways to melt, the water-cooled solid is melted by the rotary melting tank, and the air-cooled solid is melted by static melting tank.
    Membership price: 0 RMB
    Market value: 0 RMB
    Release time: 2018 - 11 - 19

Tell me your needs and submit your contents. We will contact you for the first time.!

address:Floor 14th, ZMI Plaza, No.445, Kaixuan Road, Hangzhou, Zhejiang, China      Telephone:0571-85185926









' _src='https://www.googletagmanager.com/gtag/js?id=G-P5QPZHRQ6R'>'>https://www.googletagmanager.com/gtag/js?id=G-P5QPZHRQ6R'>








Copyright ©2016- 2018 Zhejiang MEBO industrial Polytron Technologies Inc
ICP preparation in Zhejiang Province17046615-1   Zhejiang public network preparation 33052102000289
Rhinoceros cloud services