Product center Products
Product Center / Products
  • Release time: 2018 - 04 - 02
    Detergent Spray Tower | Spray Dryer for Detergent Powder Adopt detergent spray tower process. Product specific gravity: 0.25 ~ 0.50g/cm³. The product has good particle and component uniformity, good solubility and stable quality. The tail gas of the whole production system reaches the standard and no sewage discharge. Dry tail gas adopts dry and wet combined dust removal system, environmental protection standard, energy saving and consumption reduction. The design of technology is advanced and the plan is reasonable.According to customers' requirement, we provide the pl...
  • Release time: 2018 - 04 - 02
    Liquid Detergent Plant | Liquid Detergent Production LineProvide complete set of dishwashing liquid, laundry detergent, toilet liquid, hand sanitizer and other liquid detergent production line. Process and equipment design for different liquid detergent production characteristics. It has characteristics of simple process, low investment and cost. It can realize manual operation, semi-automatic control or automatic control of production.
  • Release time: 2018 - 04 - 12
    Liquid Sodium Silicate Plant | Liquid Sodium Silicate Production LineThe wet process of sodium silicate is a production method in which liquid caustic soda and quartz sand are reacted at high temperature and high pressure to obtain sodium silicate. This production method has significant advantages such as low investment, simple process, easy operation, environmental protectionand no waste generation. lt can produce sodium silicate with molar ratio below 2.5.According to customer needs, we can provide consulting, design, supply, installation, debugging and training services for a complete set o...
  • Release time: 2018 - 11 - 19
    Sodium Silicate Plant | Sodium Silicate FurnaceThe main raw materials of dry process sodium silicate production are soda ash and quartz sand. The process is batching, firing and melting.Process description1. Batching: batching can be divided into manual batching and automatic batching. Manual batching is manually weighing the quartz sand and soda ash according to the proportion of the formula, then put into the furnace to react through lifter. Automatic batching is automatically weighing the quartz sand and soda ash, then automatically put into the furnace to react through loader.2. Firing: af...
  • Release time: 2018 - 04 - 16
    Hot Air Generator | Hot Air FurnaceWe mainly design and manufacture a variety of special industrial firnaces, including direct hot air furnace, indirect hot air furnace, biomass fired hot air furnace, oil/gas fired hot air furnace, regenerative exhaust gas furnace and so on. Our hot air furnace has been widely used in chemical, fertilizer, feedstuff, building materials, medicine, food, metallurgy and other industries's product lines.
Contact information

Tel:0571-85185926  86036218

After-sales:0571-86036279

Fax:0571-85184885

China · Hangzhou

Address:Floor 14th, ZMI Plaza, No.445, Kaixuan Road, Hangzhou, China

Product name: Calcium Chloride Production Line
Date of listing:2022-04-12

Calcium Chloride Production Line

Product description: Calcium Chloride Plant | Calcium Chloride Production LineCalcium chloride is a white or off-white porous block, granular and powdery product. It is odorless, slightly bitter, highly hygroscopic and extremely deliquescent when exposed to air. It is easily soluble in water while releasing a lot of heat. Calcium chloride has a wide range of uses and is mostly used as a desiccant and dehydrating agent. Its aqueous solution is the main refrigerant for ammonia refrigerators. It can accelerate the hardening of concrete and increase the cold resistance of building mortar, and is an excellent building antifreeze. It is used as antifogging agent and deicing agent in ports and airports, road dust collector and fabric fireproofing agent.The production methods of calcium chloride is hydrochloric acid and limestone method. The products are of good quality and widely used. At present, most of them are produced by by-product hydrochloric acid, mainly anhydrous calcium chloride.Process introductionReaction section: The hydrochloric acid sent from the tank area is added to the reaction tank containing limestone through the hydrochloric acid high-level tank. The hydrochloric acid reacts with the limestone in the tank to generate calcium chloride mother liquor, and the acidic calcium chloride solution generated by the reaction is put into the neutralization tank by self-flow. Add calcium hydroxide to the neutralization tank to neutralize excess acid. The neutralized calcium chloride solution is pumped to the filter press for continuous filtration, and the filtered clear liquid is put into the mother liquor receiving tank by self-flow. The mother liquor in the mother liquor receiving tank is pumped to the large storage tank of calcium chloride mother liquor for static storage. During the reaction, carbon dioxide will be released, and part of the tail gas such as hydrogen chloride will be entrained. The acid waste gas generated by the reaction tank and the hydrochloric acid high-level tank is all collected and absorbed by the two stage tail gas absorption towers, and discharged after reaching the standard.Chemical equation: 2HCl+CaCO3= CaCl2+H2O+ CO2Granulation section: the static calcium chloride mother liquor is sent to the circulation tank, and then pumped into the foam absorption tower to wash the high temperature tail gas from the granulation tower, and the calcium chloride dust and heat in the tail gas are recovered to  concentrate calcium chloride mother liquor. The concentrated calcium chloride mother liquor is pumped into the atomizing nozzle on the granulation tower, under the action of high temperature hot air, it is dried to form granular anhydrous calcium chloride, which is then cooled and screened for packaging. The high-temperature tail gas generated during the drying and granulation process is passed into the foam tower, and the circulating calcium chloride mother liquor absorbs part of the heat and calcium chloride dust, and then the tail gas is pumped into the tail gas cylinder by the tail gas fan for air emission.
Fabric:
category:
 
 
Model:
  • Product description
  • product details
  •  

Calcium Chloride Plant | Calcium Chloride Production Line

Calcium chloride is a white or off-white porous block, granular and powdery product. It is odorless, slightly bitter, highly hygroscopic and extremely deliquescent when exposed to air. It is easily soluble in water while releasing a lot of heat. Calcium chloride has a wide range of uses and is mostly used as a desiccant and dehydrating agent. Its aqueous solution is the main refrigerant for ammonia refrigerators. It can accelerate the hardening of concrete and increase the cold resistance of building mortar, and is an excellent building antifreeze. It is used as antifogging agent and deicing agent in ports and airports, road dust collector and fabric fireproofing agent.

The production methods of calcium chloride is hydrochloric acid and limestone method. The products are of good quality and widely used. At present, most of them are produced by by-product hydrochloric acid, mainly anhydrous calcium chloride.


Process introduction

Reaction section: The hydrochloric acid sent from the tank area is added to the reaction tank containing limestone through the hydrochloric acid high-level tank. The hydrochloric acid reacts with the limestone in the tank to generate calcium chloride mother liquor, and the acidic calcium chloride solution generated by the reaction is put into the neutralization tank by self-flow. Add calcium hydroxide to the neutralization tank to neutralize excess acid. The neutralized calcium chloride solution is pumped to the filter press for continuous filtration, and the filtered clear liquid is put into the mother liquor receiving tank by self-flow. The mother liquor in the mother liquor receiving tank is pumped to the large storage tank of calcium chloride mother liquor for static storage. During the reaction, carbon dioxide will be released, and part of the tail gas such as hydrogen chloride will be entrained. The acid waste gas generated by the reaction tank and the hydrochloric acid high-level tank is all collected and absorbed by the two stage tail gas absorption towers, and discharged after reaching the standard.

Chemical equation: 2HCl+CaCO3CaCl2+H2O+ CO2

Granulation section: the static calcium chloride mother liquor is sent to the circulation tank, and then pumped into the foam absorption tower to wash the high temperature tail gas from the granulation tower, and the calcium chloride dust and heat in the tail gas are recovered to  concentrate calcium chloride mother liquor. The concentrated calcium chloride mother liquor is pumped into the atomizing nozzle on the granulation tower, under the action of high temperature hot air, it is dried to form granular anhydrous calcium chloride, which is then cooled and screened for packaging. The high-temperature tail gas generated during the drying and granulation process is passed into the foam tower, and the circulating calcium chloride mother liquor absorbs part of the heat and calcium chloride dust, and then the tail gas is pumped into the tail gas cylinder by the tail gas fan for air emission.


Calcium Chloride Production Line   Calcium Chloride Production Line


Calcium Chloride Production Line   Calcium Chloride Production Line


Calcium Chloride Production Line   Calcium Chloride Production Line


Calcium Chloride Production Line   Calcium Chloride Production Line


Calcium Chloride Production Line   Calcium Chloride Production Line


The last one: noNext: no
Relevant recommendations / Products more
  • Detergent Spray Tower | Spray Dryer for Detergent Powder Adopt detergent spray tower process. Product specific gravity: 0.25 ~ 0.50g/cm³. The product has good particle and component uniformity, good solubility and stable quality. The tail gas of the whole production system reaches the standard and no sewage discharge. Dry tail gas adopts dry and wet combined dust removal system, environmental protection standard, energy saving and consumption reduction. The design of technology is advanced and the plan is reasonable.According to customers' requirement, we provide the plan, design, equipment supply, installation and debugging of a complete production line for detergent base powder production of 5000 ~ 25000 tons/year.Process configuration from simple manual operation to central computer centralized automatic control.We provide design,manufacture, installation and commissioning of a complete set of detergent spray tower.We undertake detergent powder production technical consultation and old line transformation technical services.Our company has successfully provided more than 160 chemical enterprises with technical services and equipment around the world, including Unilever, P&G, Indonesia PT Wings, Guangzhou Liby Group, Nice Group, Nafine Group, Guangzhou Lonkey, Topseller Chemical CO., Ltd., Lipton Washing Products Industrial Co. Ltd. ,Nanjing Jiahe Chemical Co., Ltd.
    Membership price: 0 RMB
    Market value: 0 RMB
    Release time: 2018 - 04 - 02
  • Liquid Detergent Plant | Liquid Detergent Production LineProvide complete set of dishwashing liquid, laundry detergent, toilet liquid, hand sanitizer and other liquid detergent production line. Process and equipment design for different liquid detergent production characteristics. It has characteristics of simple process, low investment and cost. It can realize manual operation, semi-automatic control or automatic control of production.
    Membership price: 0 RMB
    Market value: 0 RMB
    Release time: 2018 - 04 - 02
  • Sodium Silicate Plant | Sodium Silicate FurnaceThe main raw materials of dry process sodium silicate production are soda ash and quartz sand. The process is batching, firing and melting.Process description1. Batching: batching can be divided into manual batching and automatic batching. Manual batching is manually weighing the quartz sand and soda ash according to the proportion of the formula, then put into the furnace to react through lifter. Automatic batching is automatically weighing the quartz sand and soda ash, then automatically put into the furnace to react through loader.2. Firing: after the materials are fed into the furnace, the chemical reaction is occurred at the high temperature of 1350-1450℃. The molten sodium silicate form glassy solid lumps by air cooling or water cooling. Finished products are sent to warehouses or stacked or cooled to normal temperature. The regenerative preheater is used in the design of the reflector. The air and coal gas can be separately preheated to 1100℃ and 900℃ by 1200℃ of flue gas from furnace, temperature of exhaust gas is reduced to below 180℃, so as to save energy and reduce consumption.3. Melting: if liquid sodium silicate is needed, the solid sodium silicate can be melted into liquid. There are two ways to melt, the water-cooled solid is melted by the rotary melting tank, and the air-cooled solid is melted by static melting tank.
    Membership price: 0 RMB
    Market value: 0 RMB
    Release time: 2018 - 11 - 19

Tell me your needs and submit your contents. We will contact you for the first time.!

address:Floor 14th, ZMI Plaza, No.445, Kaixuan Road, Hangzhou, Zhejiang, China      Telephone:0571-85185926





Copyright ©2016- 2018 Zhejiang MEBO industrial Polytron Technologies Inc
ICP preparation in Zhejiang Province17046615-1   Zhejiang public network preparation 33052102000289
Rhinoceros cloud services